TDAB101
Features:
In-Depth Battery Testing
Battery Test displays SOH (State of Health), SOC (State of Charge), Voltage, Current, Rating, and analysis results on the LCD screen.
Different Battery Test Results Explained:
1. Good Battery: The battery is in good condition
2. Good, Recharge: It€i¢s a good battery with low current, recharge it before next use;
3. Replace: The battery is almost or already broken, and you should replace the battery;
4. Bad Cell, Replace: The battery is broken, internally damaged or has short circuit and it€i¢s time to replace the battery;
5. Charge-Retest: Unstable battery should be recharged and retested to avoid errors. If the same test result appears again, the battery is regarded as damaged. Replace the battery.
Cranking System Test:
1.Select cranking test and start the engine when prompted, then tester will automatically complete the test;
2. The tester will display the result including actual cranking voltage and actual cranking time;
3.If cranking voltage is lower than 9.6V, the cranking system is regarded as abnormal;
4.If cranking voltage is higher than 9.6V, the cranking system is OK.
Charging System Test:
Charging Voltage: Normal €“ the generator output is normal, no problems detected;
Charging Voltage: Low €“ check the drive belt of the generator and the connection between generator and battery, or follow the manufacturer€i¢s guidelines to eliminate the generator fault;
Charging Voltage: High €“ replace the generator assembly or a regulator to avoid battery damage;
No Voltage Output €“ check the generator connection and the belt;
Diode Test €“ there is at least one diode that is damaged if the ripple voltage is too high.
Multiple Languages:
English, Russian, Spanish, French, Italian, German
Notice:
Voltage test range: 8-16 VDC
Warranty:
12-month warranty
Specifications:
Display: 220*176 LCD
Acid-proof plastic with silica gel buttons
CCA: Cold Cranking Amps (Range: 100~2000)
BCI: Battery Council International (100~2000)
CA: Cranking Amps (100~2000)
MCA: Marine Cranking Amps (100~2000)
JIS: Japan Industrial Standard (26A17~245H52)
DIN: German Auto Industry Committee (100~1400)
IEC: Internal Electrical Technical Commission (100~1400)
EN: European Automobile Industry Association (100~2000)
SAE: Society of Automotive Engineers (100~2000)
GB: China National Standard (30Ah~200Ah)
Package List:
1* Main Unit
1* User Manual