Menu
0
0

Your Cart is Empty

Home / Products / TLS | 10,000 lb. Capacity Flexmetric Extended Height Lift
TLS | 10,000 lb. Capacity Flexmetric Extended Height Lift

TLS210NXx1

TLS | 10,000 lb. Capacity Flexmetric Extended Height Lift

CALL FOR PRICING 1-877-486-0634

FEATURES:

  • Stronger and more stable structure - up to 20% heavier than many competitors. Two (2) / 51mm reinforcement tubes are welded inside the 11 x 7 with 1/4 wall / 279mm x 178mm with 6mm wall columns to provide better stability with heavier loads.
  • Corrosion-resistant protection - steel components are wheel-a-brator shot blasted and acid washed before a €œdouble bake powder coat finish is applied.
  • Lifts higher to provide more under car work area - the 70-1/2 / 1791mm long cylinder stroke provides 76 / 1930mm lift without adapters with a maximum attainable lift height of 87 / 2210mm.
  • Flexible vehicle loading - Flexmetric arm design uses three (3) piece €œoffset front and straight (3) piece rear lifting arms for optimum asymmetric and symmetric loading opportunities.
  • Reduced installation costs - field adjustable height and width can easily adapt to most installation dimensions. Premium North American Components - North American-made Bucher 2HP / 1.5kw power unit, 3/8/ 9.5mm equalizing cables, and 2 / 51mm ID hydraulic cylinders provide longer, more dependable service life.
  • Reduced vehicle setup time - Acme screw œdrop style lift pads have a lowered height with a rubber pad of 4 / 102mm and can be extended by 1-1/2 / 38mm, 3 / 76mm, or 6 / 152mm using nickel-plated drop-in adapters. A power unit can be installed on either column.
  • Quieter operation less than <75 decibels - rubber mounting grommets reduce power unit noise. Car door protection - 11 x 2 /279mm x 51mm rubber door bumpers are mounted on both lifting carriages' faces to reduce door damage.
  • More models to choose from - standard Flexmetric design with 3 piece lifting arms, symmetric version with equal length straight arms, extended height 172 / 4389mm, and choice of red or blue.

ACCESSORIES:

Three piece, offset arms front and rear for asymmetric and symmetric loading Three piece, offset arms front and rear for asymmetric and symmetric loading  Height adapters #TLS2PTA4-2 Height adapters #TLS2PTA4-2
Drop in screw adjustment style lifting pads Drop in screw adjustment style lifting pads 3/8" / 9.5mm non-fatigue cables with 3-1/2" / 89mm pulleys 3/8 / 9.5mm non fatigue cables with 3-1/2 / 89mm pulleys
2" / 51mm tube column reinforcement 2 / 51mm tube column reinforcement Single-point lock release Single point lock release

SPECIFICATIONS:

Capacity 10,000 lb. / 4.5T
Overall Height 138" or 148" / 3505mm or 3759mm
Under Bar Clearance (Field Adjustable) 131" or 141" / 3327mm or 3581mm
Overall Width 135-1/2" / 3429mm
Width Between Columns 112-3/4" / 2845mm
Drive Thru Width 92" / 2337mm - symmertric 100/ 2540mm
Height to Lowered Lift Pad 4" / 102mm
Raised Height with Standard Pad 76" / 1930mm
Raise Height with Adapters 87" / 2210mm
Lifting Time 55 seconds
Front Arm Reach 19-3/4" to 42" / 502mm to 1067mm - Symmetric 35 to 60 / 889mm to 1524mm
Rear Arm Reach 35" to 60" / 889mm to 1524mm
Standard Power Requirements 230 Volts - 50/60 Hz - 1 PH - 20amp
Shipping Weight 1,980 lbs. / 900 kg.
Model: TLS210NRx1 Height as listed
Model: TLS210SRx1 Height as listed, Symmetric, Equal Arms
Model: TLS210NXx1 Extended Ht. 172 / 4370mm
Model: TLS210SXx1 Extended Ht. 172 / 4370mm Symmetric

You may also like