TLS | 10,000 lb. Capacity Flexmetric Extended Height Lift

Features

Stronger and more stable structure - Up to 20% heavier than many competitors. Two (2) / 51mm reinforcement tubes are welded inside the 11 x 7 with 1/4" wall / 279mm x 178mm with 6mm wall columns to provide better stability with heavier loads.

Corrosion-resistant protection - Steel components are Wheelabrator shot blasted and acid washed before a "double bake" powder coat finish is applied.

Lifts higher to provide more under-car work area - The 70-1/2" / 1791mm long cylinder stroke provides 76" / 1930mm lift without adapters, with a maximum attainable lift height of 87" / 2210mm.

Flexible vehicle loading - Flexmetric arm design uses three (3) piece "offset" front and straight three (3) piece rear lifting arms for optimum asymmetric and symmetric loading opportunities.

Reduced installation costs - Field adjustable height and width can easily adapt to most installation dimensions.

Premium North American Components - North American-made Bucher 2HP / 1.5kw power unit, 3/8" / 9.5mm equalizing cables, and two (2) / 51mm ID hydraulic cylinders provide longer, more dependable service life.

Reduced vehicle setup time - Acme screw "drop style" lift pads have a lowered height with a rubber pad of 4" / 102mm and can be extended by 1-1/2" / 38mm, 3" / 76mm, or 6" / 152mm using nickel-plated drop-in adapters. A power unit can be installed on either column.

Quieter operation (less than 75 decibels) - Rubber mounting grommets reduce power unit noise.

Car door protection - 11" x 2" / 279mm x 51mm rubber door bumpers are mounted on both lifting carriages' faces to reduce door damage.

More models to choose from - Standard Flexmetric design with three (3) piece lifting arms, symmetric version with equal-length straight arms, extended height 172" / 4389mm, and a choice of red or blue.

Three piece, offset arms front and rear for asymmetric and symmetric loading

Height adapters #TLS2PTA4-2

Drop in screw adjustment style lifting pads

3/8" / 9.5mm non-fatigue cables with 3-1/2" / 89mm pulleys

2" / 51mm tube column reinforcement

Single point lock release

Capacity	10,000 lb. / 4.5T
Overall Height	138" or 148" / 3505mm or 3759mm
Under Bar Clearance (Field Adjustable)	131" or 141" / 3327mm or 3581mm
Overall Width	135-1/2" / 3429mm
Width Between Columns	112-3/4" / 2845mm
Drive Thru Width	92" / 2337mm - Symmetric 100" / 2540mm
Height to Lowered Lift Pad	4" / 102mm
Raised Height with Standard Pad	76" / 1930mm
Raised Height with Adapters	87" / 2210mm
Lifting Time	55 seconds
Front Arm Reach	19-3/4" to 42" / 502mm to 1067mm - Symmetric 35" to 60" / 889mm to 1524mm
Rear Arm Reach	35" to 60" / 889mm to 1524mm
Standard Power Requirements	230 Volts - 50/60 Hz - 1 PH - 20amp
Shipping Weight	1,980 lbs. / 900 kg
Model: TLS210NRx1	Height as listed
Model: TLS210SRx1	Height as listed, Symmetric, Equal Arms
Model: TLS210NXx1	Extended Height 172" / 4370mm
Model: TLS210SXx1	Extended Height 172" / 4370mm, Symmetric